BINDINGS

Gear for playing snowboards with your friends. Snowboards, outerwear, bindings, boots, stomp pads, mankinis, etc.
User avatar
C.Fuzzy
Reactions:
Posts: 1023
Joined: Thu Jun 02, 2022 9:13 am

Re: BINDINGS

Post by C.Fuzzy »

I've written something like this on the prior EL but i think it may be beneficial in these discussions. But if we break down the goal of a binding it's really to transfer the energy from the rider to the board for manipulation and control. We can look at the design of a binding as in a sense a lever connecting the rider and board. Different bindings modify multiple elements of this lever to change this energy transference for comfort and control; such as higher or lower highbacks, stiffness (more or less glass), strap materials, position, ect. etc.

What NOW does different is due to the hinge they're able to increase the leverage force towards the edge of the board (where you want it). Think of it like a teeter totter where the greatest pressure is under the far out end where it contacts the ground. Don't put your toe under that point bc it's going to feel the full force of that energy coming down. Obviously NOWs aren't as dramatic in terms of the pivot point as a teeter totter, but that's still what they do on a smaller scale. The NOWs increase in leverage also means that in some degree the rider needs to put in less energy to get the same result. Compared to other bindings where contact is spread across the width of the board evenly if you want more energy to your toe edge you have to use your foot to get it there.

Additionally, traditional binding mounts have full contact of the binding base to the board which means every vibration in the board feeds back into the binding and then back to the foot and leg of the rider. A few bindings have put a rubber pad under the binding base to try and dampen those micro vibrations, but most bindings are just a hard surface mount. To draw a parallel, anyone that rides a motorcycle knows the grip fatigue of holding onto the hand grips, and that gloves are recommended because they alleviate some of that fatigue by cutting down on the direct vibration into the riders hands. Think about the energy of ripping down a groomer and all that board chatter and vibrations feeding back into the rider.

But because of the hinge the NOW binding has a bit of 'float' that takes up some of that vibration, and also the rubber contact pads dampen it also. This leads to less foot and leg fatigue in the rider.

What we're talking about is imo on the margin NOW does a better job of improving what the rider wants while also decreasing what the rider doesn't. Again, it's on the margin. This is probably like shaving grams off your bike. It's not going to revolutionize anyone riding. But to a certain level rider it's noticeable and well worth it.

For the record I typically ride the softer sets of NOW pads on my heelside and a medium on the toe side. I always like to add that the terrain likely factors into that.
jadhevou
User avatar
Spenser
Reactions:
Posts: 1405
Joined: Fri Jun 03, 2022 12:49 am
Location: Juneau, AK
Contact:

Re: BINDINGS

Post by Spenser »

Don’t want to further accidentally turn this into a now thread 😜 but just cause it throws people off sometimes - yes there’s a “hinge” and the solid baseplate rocks back & forth, but it’s a minor movement, and the overall design & bushings keep the binding planted on the board as per usual - there’s no hinge/rocking feeling (although I heard reports of that during their first production year). It’s simply the same general motion as a traditional binding flexing, but designed into the baseplate to be useful. Again, I think it’s a pretty simple approach, nothing complicated. Wish I had tried them years ago.

If I couldn’t ride them, I’d probably go back to a stiffer B with heel hammock
User avatar
coleslawed
Reactions:
Posts: 939
Joined: Thu Jun 02, 2022 9:16 pm
Location: midwest
Contact:

Re: BINDINGS

Post by coleslawed »

i’m still not convinced SkateTech works that much differently than a fully dampened base like a Strata or Atlas, or even Arbor’s System X base.

need to give them another try though. had some Jones mounted up at a demo and they just were not dialed in properly. couldn’t make a heel side turn for the life of me.
midwest is best

alchemy.is
User avatar
C.Fuzzy
Reactions:
Posts: 1023
Joined: Thu Jun 02, 2022 9:13 am

Re: BINDINGS

Post by C.Fuzzy »

coleslawed wrote: Tue Sep 13, 2022 8:51 am i’m still not convinced SkateTech works that much differently than a fully dampened base like a Strata or Atlas, or even Arbor’s System X base.

need to give them another try though. had some Jones mounted up at a demo and they just were not dialed in properly. couldn’t make a heel side turn for the life of me.
It would be interesting to have someone smart do some sort of mathematical analysis and give a number to what the potential benefits would be. I'd love for it to be zero. And I don't ever tell anyone to not buy any other bindings. I think most all the brands are rad and obviously work really very well. As far as I'm aware, there isn't anyone riding nows in the Olympics, so if you can do quad corks all day long on those other bindings they're clearly high performing equipment.

I only tried NOWs to say I had tried them and was looking forward to saying they were a gimmick. I had (still have really) a very strong bias against people adding complexity to snowboard gear saying they solved a problem that in a sense, we didn't have. Overcoming that to me was a surprise and I really had to put a lot of thought into understanding that because, of course, nobody wants to be the fool.

And as much as I'm willing to say it's a small benefit and on the margin maybe inconsequential, and I'd love to have more options for bindings to pick from... Still, personally I don't want to be riding anything else anymore.
jadhevou
michaelangelo
Reactions:
Posts: 613
Joined: Thu Jun 02, 2022 3:04 pm

Re: BINDINGS

Post by michaelangelo »

I want the current force base with a malavita highbacks :geek:
User avatar
Spenser
Reactions:
Posts: 1405
Joined: Fri Jun 03, 2022 12:49 am
Location: Juneau, AK
Contact:

Re: BINDINGS

Post by Spenser »

I’ll happily try a strata/atlas/whatever if someone lends me a pair 😜 (for real though)

It’s not just dampening, it’s the feeling of connection to turning and the board in general. But again, nothing is for everyone, and what’s “good” certainly isn’t linear
User avatar
coleslawed
Reactions:
Posts: 939
Joined: Thu Jun 02, 2022 9:16 pm
Location: midwest
Contact:

Re: BINDINGS

Post by coleslawed »

michaelangelo wrote: Tue Sep 13, 2022 10:50 am I want the current force base with a malavita highbacks :geek:
new Atlas w/ a Cartel X mini hammock would be amazing.
midwest is best

alchemy.is
User avatar
Shredder
Reactions:
Posts: 80
Joined: Sun Jun 05, 2022 10:19 pm
Location: Tasmania, Australia

Re: BINDINGS

Post by Shredder »

I was a Burton bindings convert since my first pair of Mission doom's and p1's back in early 00's - coming from drake and technine. Then rode cartels for years after. I'm riding NOW's, now. First pair I tried and still have are the Pilots (with burton straps) and loved the feel and extra cushy dampening. Now's tech is subtle but it works very well. Less foot fatiue and better for my dodgey knees. I have some Drives now too (with Genesis hammok straps and new Jones toe cap sraps). I have no reason to look for anything else NOW.
Directional pow shapes, camber, Now Drive/pilot 80kg, 175cm
michaelangelo
Reactions:
Posts: 613
Joined: Thu Jun 02, 2022 3:04 pm

Re: BINDINGS

Post by michaelangelo »

so we gonna get Now to sponsor EL at this rate or what? hand em over NOW
User avatar
Spenser
Reactions:
Posts: 1405
Joined: Fri Jun 03, 2022 12:49 am
Location: Juneau, AK
Contact:

Re: BINDINGS

Post by Spenser »

I was a little surprised about the now rush here. Memberberries when it was so C3 heavy?
Post Reply