The Official Mervin Manufacturing Thread

Gear for playing snowboards with your friends. Snowboards, outerwear, bindings, boots, stomp pads, mankinis, etc.
User avatar
ad1105
Reactions:
Posts: 238
Joined: Tue Jun 14, 2022 1:34 pm

The Official Mervin Manufacturing Thread

Post by ad1105 »

Didn’t find one, thought it might be a good idea to start one up.

I hadn’t ridden a Mervin deck in years, prior to last season. After a bunch of seasons on nearly every deck in the Korua Shapes lineup (still hanging onto a few shapes in the active quiver), I impulsively grabbed last season’s Jamie Lynn 160w and it was a total blast getting back on a normal-ass popsicle plank again.

So, I traded and sold a bunch of shit and now have a growing Lib/Gnu quiver. I know Mervin’s got its haters like everyone else; the graphics might not be everyone’s cup of tea, there’s reputed issues with the bases, etc., but every Mervin deck I’ve ever ridden brings a certain joy (and reckless aggression) to my day. Reminds me of the time in snowboarding where we gave fewer fucks and didn’t overthink every bit of gear.
IMG_0146.jpeg
IMG_0146.jpeg (1.96 MiB) Viewed 347 times
a bit of taper, a lot of camber
User avatar
Kevington
Reactions:
Posts: 324
Joined: Mon Jun 20, 2022 4:35 am
Location: Copenhagen

Re: The Official Mervin Manufacturing Thread

Post by Kevington »

Totally with you on this one. Riding the Banked Country at a demo last season had me on some YEEEHAAAWWWW type of vibes that I’ve not felt in years.

I’d never actually owned a Mervin deck, with the exception of buying a Mullair and selling it again without riding it due to you know what. I am kind of kicking myself for not getting the Jamie Lynn ‘96 reissue. One of those boards I really wanted as a kid but couldn’t afford. I’d love to try the JL you have on the right in the pic too.
User avatar
ad1105
Reactions:
Posts: 238
Joined: Tue Jun 14, 2022 1:34 pm

Re: The Official Mervin Manufacturing Thread

Post by ad1105 »

I’ve also got a Banked Country 60w and it was definitely a surprise standout. I’m generally steering clear of most C2 boards, but I haven’t ridden a dud Mervin, yet. That being said, even my old Lando 160 holds a hardpack carve better than a good number of other boards I own.
a bit of taper, a lot of camber
User avatar
Kevington
Reactions:
Posts: 324
Joined: Mon Jun 20, 2022 4:35 am
Location: Copenhagen

Re: The Official Mervin Manufacturing Thread

Post by Kevington »

Looks like most Libs are camber next season rather than c3.
User avatar
eleveneightnate
Reactions:
Posts: 1126
Joined: Mon Sep 19, 2022 9:05 pm
Location: North Carolina

Re: The Official Mervin Manufacturing Thread

Post by eleveneightnate »

Really want to try the Dynamo and Ejack Knife! I think my main reservations are the TNT bases and that they don't have full edge wraps in the nose and tail. Any issues with that?
User avatar
Kevington
Reactions:
Posts: 324
Joined: Mon Jun 20, 2022 4:35 am
Location: Copenhagen

Re: The Official Mervin Manufacturing Thread

Post by Kevington »

Banked has a sintered base and felt very fast to me riding back to back with a Nitro and a US. Hard to be objective about the base specifically though as the GNU was simply a very fast snowboard compared to the others.
casjcade
Reactions:
Posts: 402
Joined: Sun Sep 18, 2022 5:00 am

Re: The Official Mervin Manufacturing Thread

Post by casjcade »

eleveneightnate wrote: Sun Sep 15, 2024 12:30 pm Really want to try the Dynamo and Ejack Knife! I think my main reservations are the TNT bases and that they don't have full edge wraps in the nose and tail. Any issues with that?
TNT seems to be mostly a recycle/nice graphics thing. For some, it really doesn't matter much. Never had an issue with edges besides some full wrapped ones. The tips on Mervins are all ptex anyways, so not hard to repair.
SJF_NH
Reactions:
Posts: 196
Joined: Tue Jan 03, 2023 10:21 am
Location: New Hampshire

Re: The Official Mervin Manufacturing Thread

Post by SJF_NH »

eleveneightnate wrote: Sun Sep 15, 2024 12:30 pm Really want to try the Dynamo and Ejack Knife! I think my main reservations are the TNT bases and that they don't have full edge wraps in the nose and tail. Any issues with that?
I'll be riding the Banked Country as a daily back-to-back with the Cadet, depending mostly on how good or bad the conditions are. For frozen icy hardpack it'll be the BC all day every day. I rode the Dynamo a bunch in the past and that's a good board too, but I rode an E Jack Knife as my daily for about 5 years, and only moved away from it because full mag gets on my nerves. If they made the E Jack with progressive mag, I'd be all over that.

@ad1105's description for riding these decks with "reckless aggression" describes them perfectly.
User avatar
eleveneightnate
Reactions:
Posts: 1126
Joined: Mon Sep 19, 2022 9:05 pm
Location: North Carolina

Re: The Official Mervin Manufacturing Thread

Post by eleveneightnate »

SJF_NH wrote: Sun Sep 15, 2024 4:47 pm I'll be riding the Banked Country as a daily back-to-back with the Cadet, depending mostly on how good or bad the conditions are.
Wish the BC came in ~157W. The 160W is a lot of board for me, but the 155 and 159 are too narrow. Guess that's why I've leaned toward the Dynamo with all its size options, but then it has the shitty TNT base.

Side note, have a 159 Horizon on the way.
User avatar
ad1105
Reactions:
Posts: 238
Joined: Tue Jun 14, 2022 1:34 pm

Re: The Official Mervin Manufacturing Thread

Post by ad1105 »

It was interesting to read all the comments on TNT way back in EZ1.0. I had ridden a couple Libs back in the late 90’s and never had a glide issue, then. And anything I’ve ridden from Mervin recently didn’t have a glide issue, either. I’m wondering if that might’ve been a waxing thing? I’m usually diligent with waxing so it perhaps I’ve never ridden a dry Mervin base? 🤷🏻‍♂️

I’m not sure how I feel about pricing boards that high when they’re sporting extruded bases, but our rep tells me not all extruded bases are created equal. I should look into it 🤔
a bit of taper, a lot of camber
Post Reply